Opin vísindi

Corrosion Behaviour of Materials in Simulated High-Temperature Geothermal Environments

Show simple item record

dc.contributor Háskóli Íslands
dc.contributor University of Iceland
dc.contributor.advisor Sigrún Nanna Karlsdóttir
dc.contributor.author Þórhallsson, Andri Ísak
dc.date.accessioned 2022-05-30T13:50:37Z
dc.date.available 2022-05-30T13:50:37Z
dc.date.issued 2022-05-11
dc.identifier.isbn 978-9935-9647-4-8
dc.identifier.uri https://hdl.handle.net/20.500.11815/3200
dc.description.abstract High enthalpy geothermal fluid utilization has a potential for growth for green and sustainable energy production. Geothermal energy production is often limited by the corrosive nature of the geofluids utilized. For successful, safe and economic operation, several technological challenges have to be overcome including the appropriate selection of material(s) for casing, pipelines and other equipment. This dissertation reports the results of a corrosion behaviour study for carbon steel and several corrosion-resistant alloys tested in contact with synthetic geothermal fluids at high temperatures. Corrosion tests were carried out using superheated steam (T = 350 °C and P = 10 barG) containing H2S, CO2 and HCl and the materials tested were carbon steel, stainless steel, nickel-based alloys, titanium alloys, high-entropy alloys. Some of the materials were further tested after silica (SiO2) had been deposited on the surfaces, and under boiling and condensing conditions at lower temperatures. In superheated fluid, carbon steel and Cu added high entropy alloys (HEAs) were prone to corrosion damage but negligible damages were observed in other corrosion-resistant alloys. The carbon steel was prone to more severe corrosion damage in the boiling and condensing conditions in comparison with the superheated test fluid, hence, the corrosion behaviour of carbon steel can be associated with the physical condition and temperature of the corrosive fluid. The extent of corrosion damage of Cu added high-entropy alloys (HEAs) in the superheated fluid is associated with increased Cu content and Cu-rich intermetallics. The corrosion rates of various materials were assessed by the mass loss method (MLM) and were less than 0.1 mm/year in all cases. Microstructural analysis was done via scanning electron microscope (SEM), X-ray energy dispersive spectroscopy (XEDS) and solid and powder X-ray diffraction (XRD) analysis. From the results, it can be concluded that the corrosion-resistant alloys are immune to corrosion damage in high-enthalpy superheated geothermal fluid containing H2S, CO2 and HCl and should be selected in preference to carbon steels and Cu added HEAs in such environments.
dc.description.sponsorship RANNÍS, Landsvirkjun, Geothermal Research Group
dc.language.iso en
dc.publisher University of Iceland, School of Engineering and Natural Sciences, Faculty of Industrial Eng., Mechanical Eng. and Computer Science
dc.rights info:eu-repo/semantics/openAccess
dc.subject Efnisfræði
dc.subject Tæring málma
dc.subject Corrosion
dc.subject Koltvíoxíð
dc.subject Brennisteinsvetni
dc.subject Doktorsritgerðir
dc.title Corrosion Behaviour of Materials in Simulated High-Temperature Geothermal Environments
dc.title.alternative Tæring efna í hermdu háhita jarðhitaumhverfi
dc.type info:eu-repo/semantics/doctoralThesis
dc.contributor.department Iðnaðarverkfræði-, vélaverkfræði- og tölvunarfræðideild (HÍ)
dc.contributor.department Faculty of Industrial Eng., Mechanical Eng. and Computer Science (UI)
dc.contributor.school Verkfræði- og náttúruvísindasvið (HÍ)
dc.contributor.school School of Engineering and Natural Sciences (UI)

Files in this item

This item appears in the following Collection(s)

Show simple item record